60013 Pumptec 112V Pump Head 300psi
£152.99 – £167.99 plus VAT
Pumptec 112V replacement pump head for 300psi pump systems with 112V pump head and M72 pump motor (e.g. Airflex Mini 300). Cam bearing should always be replaced when changing the pump head as pump head and cam bearing have the same service interval. Regulator pin should also be changed on Airflex machines, add this regulator pin part also.
Not to be used with corrosive solutions. Run fresh water through the pump head after use to prolong pump life. Do no allow to freeze.
|Max Pressure (psi)||300|
|Open Flow (gpm)||1.12|
|Inlet Ports||(2) – 1/4″ NPT (F)|
|Discharge Ports||(2) – 1/4″ NPT (F)|
|Max Fluid Temp. (℉)||140|
PSK1 Airflex 600psi pumphead complete with cam bearing, regulator pin and tube of silicone grease0 out of 5£200.81 plus VAT Add to basket
R300 Airflex pressure gauge Airflex Pro/Turbo/Storm machines up to 800psi0 out of 5£19.99 plus VAT Add to basket
PSK2 Airflex 800psi pumphead complete with cam bearing, regulator pin and tube of silicone grease0 out of 5£200.81 plus VAT Add to basket
R308 Regulator pin0 out of 5£15.75 plus VAT Add to basket