400psi Pump Motor-only (no base plate or rectifier)
£184.99 plus VAT
Motor for Pumptec 207V pump head at 400psi
If the motor is being installed as a replacement, normally the base plate and rectifier are re-used from the motor being replaced.
Otherwise you will also need the motor’s base plate, rectifier, and a 400psi cam bearing (to make sure the motor is set up correctly with the pump head). If a replacement pump head is needed see pump head parts here.
Motor measures 110mm (H) x 110mm (W) x 225mm (L)
M18 1/2 hp motor for Airflex 600 and 800 psi pumps0 out of 5£365.00 plus VAT Add to basket
600 & 800psi Cam Bearing for 207v Pump Head0 out of 5£23.49 plus VAT Add to basket
P1132 Pumptec M72 motor0 out of 5£250.00 plus VAT Add to basket
Large 3/8″ Male Q/C (NO shut-off valve)0 out of 5£9.99 plus VAT Add to basket